B; press ENTER; press 2 for A; 7 three times for R; and 2 two times for B. You need to press enter between the B and the A since they are stored within the same number key.
NOTE: To enter characters other than letters, press and scroll through the choice available on numbers 1,2,3,4,5,6 and 8.
4. Press MEMORY.
The display prompts you to 'Enter Tel Number.'
5.Use the keypad to enter the number you want to store (up to 24 digits).
6.Press MEMORY and then press a number key
7.Record whose number is stored in the location on the memory directory card on the back of the handset. You will also be able to view the name and number in the display.
NOTE: If you do not want to enter the name, skip Step 3.
TIP: If you make a mistake while storing names and numbers, you can use the DELETE button to backspace and correct errors.
MEMORY
MEMORY
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the FLASH button to insert a delay in the |
|
|
|
dialing sequence of a stored telephone number when | FLASH | ||
a pause is needed to wait for a dial tone - for example, |
|
|
|
after you dial 9 for an outside line or to wait for a |
|
|
|
computer access tone. Each pause counts as 1 digit |
|
|
|
|
|
| |
in the dialing sequence. |
|
|
|
VERY IMPORTANT: If you make test calls to emergency numbers stored in memory, remain on the line and briefly explain the reason for the call to the dispatcher. Also, it is a good idea to make these calls in
17
