REMOTE ACCESS
You can access your answerer from any touch-tone phone by entering your 3-digit security code (the default security code is 123, but you can change it.) Be aware that remote functions do not work with rotary or push-button pulse- dialing phones. You can cut out the wallet-size remote card on page 19 so you know the touch-tone commands when you're picking up messages from another location.
To access your answerer:
1.Call your telephone number.
2.After you hear the beep that follows the greeting, enter your 3-digit security code. To bypass the greeting, you can enter your 3-digit security code any time while the greeting is playing.
3.The unit plays the remote menu after the correct security code has been entered. Menu selections can be made while the menu is playing.
NOTE: The unit answers on the 10th ring when it is turned off or the memory is full. To access the answerer, enter the 3-digit security code after the beep. If memory is full, play messages and erase some of them to restore memory. If the answerer is off, press 2 to turn it on.
NOTE: After the unit plays the remote menu, it will wait 10 seconds for a command, then disconnect.
