GE 20309 Code Search

If your device does not respond after you have tried all the codes

for your brand, or if your brand is not listed, try searching for your

code by following these steps.

1. Manually turn on the device (TV, VCR, etc.) to be

controlled.

2. Press and hold the SETUP button until the red indicator

stays on, then release the SETUP button.

3. Press and quickly release the desired mode button

(TV, VCR, etc.). The red indicator blinks off once.

4. Press the ON•OFF button repeatedly (up to 300

times) until the device to be controlled turns off.

The red indicator blinks off with each button press.

5. Press and release ENTER to install the code.

Most users will store VCR codes under the VCR button,

Cable codes under CABLE, etc. If (for example) you want to store a

VCR code under CABLE, ﬁrst follow the procedure for Direct Code

Entry (page 8) and press CABLE in step 2 of Direct Code Entry, then

enter ANY VCR code in step 3 of Direct Code Entry. Then follow the

steps above for Code Search.

Note: If the device does not have a CHANNEL UP button, use PLAY

(VCR only) or POWER instead. Code Search starts from the currently

stored 4 digit number under that mode. Sometimes the ﬁrst code

that “works” with your device may only allow limited functionality

(e.g. the MENU button might not work). There may be a code that

performs more functions. Continue the code search process until

the best code is found.

Code Search