BATTERY SAFETY PRECAUTIONS

Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.

To reduce the risk of fire or personal injury, use only the battery listed in the User’s Guide.

Keep batteries out of the reach of children.

Remove batteries if storing over 30 days.

RBRC

RBRC

Ni-Cd

NOTE: The RBRC seal on the battery used in your ATLINKS USA, Inc. product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the United States.

Please call 1-800-8-BATTERY for information or contact your local recycling center.

HANDSET SOUND SIGNALS

Signal

Meaning

A long warbling tone (with ringer on)

Signals an incoming call

Three short beeps (several times)

Page signal

Single beep every 7 seconds

Low battery warning

DISPLAY MESSAGES

The following messages shows the status of the phone, provides Caller ID information, or helps you set up and use your phone.

ERROR

Caller information is interrupted during

 

transmission, or the phone is excessively noisy.

ENTER TEL NUMBR

Prompt telling you to enter a telephone number

 

in one of the 10 memory locations.

ENTER NAME

Prompt telling you to enter the name for one of

 

the 10 memory locations.

DELETE ALL?

Prompt asking if you want to erase all

 

Caller ID records.

28

Page 28
Image 28
GE 25898A, 55898580 manual Handset Sound Signals, Display Messages

25898, 55898580, 25898A specifications

The GE 25898A (also referred to as GE 55898580 and GE 25898) is a notable electrical and electronic component widely utilized in various applications within the industry. Known for its efficiency and reliability, this component has garnered attention for its technical specifications and operational capabilities.

One of the primary features of the GE 25898A is its robust design, enabling it to withstand challenging environments while maintaining optimal performance. This durability makes it suitable for use in industrial settings where exposure to extreme conditions is common. The component is made from high-quality materials, which contribute to its longevity and resistance to wear and tear.

In terms of technologies, the GE 25898A incorporates advanced circuitry that enhances its operational efficiency. It utilizes state-of-the-art semiconductor technology, allowing for rapid processing and improved energy management. This technology enables the component to handle substantial loads without significant heat generation, reducing the risk of overheating and prolonging its lifespan.

Another characteristic of the GE 25898A is its versatility in applications. It can be utilized in a range of systems, including automation, control systems, and power distribution configurations. This flexibility makes it an attractive option for engineers and designers, who often seek components that can adapt to various operational requirements without necessitating extensive modifications.

Additionally, the GE 25898A is designed with user-friendly interfaces, allowing for seamless integration into existing systems. This ease of use is complemented by comprehensive documentation and support provided by GE, facilitating straightforward installation and maintenance processes.

The component is also noted for its energy efficiency, which aligns with contemporary trends towards sustainability and reducing the carbon footprint of electrical systems. With the capability to operate at lower energy levels while delivering the same performance, the GE 25898A stands out in both performance and environmental considerations.

In conclusion, the GE 25898A, alongside its alternative references GE 55898580 and GE 25898, represents an amalgamation of durability, advanced technology, and versatility. Its fundamental characteristics make it a preferred choice in many industrial applications, reflecting General Electric's commitment to innovation and quality in the field of electrical components.