1

Installing the Base/Photo Frame
1. Insert the legs of the metal stand into the holes on the bottom of the base, push
until they snap into place.
. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and
place your cordless telephone on a level surface, such as a desktop or tabletop, or
you may mount it on the wall.
. Connect one end of the telephone line cord into the TEL LINE jack on the back of
the base and the other end into a modular jack.
4. Connect the AC power adaptor into the electrical outlet and the DC connector into
the jack on the back of the base.
CAUTION: To reduce risk of personal injury, re, or damage
use only the 5-
2833
power adaptor listed in the user’s guide.
This power adaptor is intended to be correctly orientated in a
vertical or oor mount position.
5. Place the handset in the base cradle. The charge indicator illuminates verifying
the battery is charging.
Allow the phone to charge for 14 hours prior to rst use. If you don’t properly
charge the phone, battery performance is compromised.