GE 28115 Series manual Exit, Mute, Base Paging

4. Press the talk button. The number dials automatically.

If you get a busy signal and want to keep dialing the number, press the redial button to quickly redial the number.

Exit

Press the end button to exit a menu function and return to the standby screen.

Page

The page feature helps you locate a misplaced handset. To send and receive pages, all handsets must be registered. If your handset is not registered, follow the instructions in the Registration section of this manual.

Handset Paging (applicable only with additional handsets)

1.Make sure the phone is OFF (not in talk mode).

2.Press and release the del/conf/intercom button on a handset. PAGING EXTENSION? shows in the display.

3.Use the touch-tone pad to enter the handset number you want to page. (1= to page Handset 1, 2=to page handset 2, etc., or *=to page all handsets)

4.To cancel the page, press the end, del/conf/intercom button on the originating handset, or press the talk button on the receiving handset.

Base Paging

Use the base to page all registered handsets at the same time.

1.Press the page button on the base. All handsets beep for two minutes, and PAGING FROM BASE shows on each handset’s display.

2.To cancel the page, press the page button on the base, or press the talk or the end button on each handset.

Mute

To have a private, off-line conversation, use the MUTE feature. The party on the telephone line cannot hear you, but you can hear them.

1.Press the menu ok/mute button. The handset display shows MUTE ON.

2.Press the menu ok/mute button to cancel and return to your phone conversation.

21