Window Installation Instructions
Prepare the Window
5 | A | Loosely attach the sill brackets to the support |
brackets using the 2 carriage bolts and 2 |
lock nuts.
Support bracket
Carriage bolt
Lock nut
Sill bracket
BOpen the window and mark the centerline of the window stool. Measure and mark 11″ to the left and right of the centerline.
Centerline
″ 11 ″ 11
TroubleshootingTips Installation Instructions OperatingInstructions SafetyInstructions
CustomerService
Install the Case in the Window
6 |
| Align the inside edge of the sill brackets with | |
A | |||
the 11″ marks from the centerline and attach | |||
| |||
|
| them to the window sill using 2 type B screws | |
|
| on each side. | |
|
| Carefully place the case on the window stool | |
| B | ||
|
| aligning the center front on the bottom with | |
|
| ||
|
| the centerline marked on the window stool. | |
|
| Close the window making sure the window sash | |
|
| is behind the top mounting rail. | |
|
| Using the larger diameter hole in the case, attach | |
| C | ||
|
| the brackets to the case using two type D screws | |
|
| ||
|
| and 2 lock nuts on each side. |
Type D screws with lock nuts
Type B screws
DAdjust the carriage bolts and the lock nuts in each support so that the case is installed with a slight downward tilt (about 1/4″) toward the outside. Tighten the bolts.
CAUTION: DO NOT drill a hole in the base pan. The unit is designed to operate with approximately 1/2 ″ of water in the base pan.
E
F
Secure the case to the window stool by using 3 type B screws.
Pull the accordion panels to each window sash track. Attach them on each side to the window sash and the window stool using 4 type C screws.
12