GE 465 owner manual About your dryer features

About your dryer features.

Safety Instructions

Color Logic

Select the correct FABRIC CARE setting. Match the particular color below the words with the same color on the Cycle Dial.

Example: Drying a load of clothing labeled permanent press.

1

2

Choose the FABRIC CARE setting-—for this load it would be the EASY CARE MED. HEAT (which is a particular color).

Turn the Cycle Dial to the area that has the same color as the FABRIC CARE setting you have chosen—for this load it would be the EASY CARE AUTOMATIC.

Instructions

Wrinkle Care

Use this option to minimize the wrinkles in clothes. It provides approximately 15 minutes of no-heat tumbling after the clothes are dry.

This option can only be used with the COTTONS, EASY CARE, DELICATES, and ULTRACARE cycles. If you are using the CYCLE SIGNAL and you select the WRINKLE CARE

option, a signal will sound at the end of the drying time and several times during the WRINKLE CARE cycle. This will remind you that it is time to remove the clothes.

If WRINKLE CARE is not ON, the dryer will stop once the timer reaches the WRINKLE CARE mark on the cycle dial.

Operating

Tips

End of Cycle Signal

This signal will sound just before the end of the cycle to remind you to remove the clothes. On some models, the signal sound level can be adjusted.

If you selected the WRINKLE CARE option the signal will sound at the end of the drying time and will sound several times during the WRINKLE CARE cycle. This will

(appearance may vary) remind you that it is time to remove the clothes.

NOTE:

■Remove garments promptly at the sound of the signal. Place clothes on hangers so wrinkles won’t set in.

■Use the END OF CYCLE SIGNAL especially when drying fabrics like polyester knits and permanent press. These fabrics should be removed so wrinkles won’t set in.

Troubleshooting

Dryness

Sensor Cycle

Dryness Sensor Cycle–on some models

This feature is only activated in the COTTONS, EASY CARE, DELICATES, and ULTRACARE cycles.

The Dryness Sensor provides greater drying accuracy than standard machines, resulting in shorter dry times and better clothes care. As the clothes tumble, they touch a moisture sensor. The sensor will stop the heating cycle as soon as the clothes have reached the selected dryness.

On some models, there is a Dryness Sensor Cycle indicator light. This light is illuminated during automatic cycles. When the Dryness Sensor feature stops the heating cycle, the light will go out and the cool down period will begin.

Note: The clothes will be hot if they are removed immediately after the indicator light goes out.

Customer Service

Drum Lamp

	Before replacing the light bulb, be sure to	circuit breaker. Reach above dryer opening
	unplug the dryer power cord or disconnect	from inside the drum. Remove the bulb and
	the dryer at the household distribution panel	replace with the same size bulb.
	by removing the fuse or switching off the
	Automatic Cycle Signal–on some models
Automatic Cycle	At the end of each cycle there is	A reminder signal will sound periodically
Signal	approximately 15 minutes of no-heat	during this time to remind you to remove the
	tumbling after the laundry is dry.	laundry.

8