OPERATING INSTRUCTIONS
1. Place the jar on the base, be sure the triangle on the motor aligns with “ ” mark (see Fig. 1). Turn the jar clockwise until the triangle is aligned with the
“” mark (see Fig.2). The appliance cannot be activated without the jar in correct position.
2.Add ingredients to be blended. The volume of ingredients should not exceed the max level as indicated on the jar.
Note: never use boiling liquids or run the appliance empty.
3.Replace the top cover on the jar.
4.You may add ingredients into the jar through the opening in the top cover during operation, then replace measuring cup. Align the tabs of the measuring cup with the grooves of the top cover. Press down and turn the measuring cup
5.Connect the plug to the wall outlet and set speed selector to desired setting. See figure 3 for detailed information of the speed selector.
Note: Make sure the top cover is placed in position completely before operating, and never open the top cover during operation.
Fig. 1
Fig. 2
Pulse
Set and hold the pulse, release the knob to stop
Fig. 3
Stop
At any time, set the knob to “0” to stop the appliance
P 0 1 2
3
4
5
Lowset speed
Highest speed
6.The maximum run time is 1 minute. The minimum rest time is 2 minutes. The appliance must rest for 30 minutes every 10 cycles.
7.Turn the Speed Selector to the “0” position once the ingredients have been blended to the desired consistency.
8.Turn the jar
