OPERATING INSTRUCTIONS
Note : During operation, you can take out carafe, pour and serve at any time. the
appliance will stop dripping automatically. replace carafe within 30 seconds to avoid filter basket overfill.
4.This coffee maker will NOT start again automatically the next day. To reset PROGRAM BREW, repeat steps 2 through 3 above.
5.To make another pot of coffee, turn off the coffee maker. Clean the unit per instruction “Cleaning the Grinding and Brewing unit. Repeat steps 1 through 7.
6.Be sure to turn off your coffee maker when no longer in use. Press the “auto/on/off“ button until the unit is off, then unplug the unit.
BREW COFFEE WITH PRE-GROUND COFFEE
1.Press the lid release button in front of the coffee maker to open the lid (figure #1). Remove the grinding chamber assembly (figure #2). Insert a #4 paper cone filter or the gold filter into the filter basket. When using a paper filter, wet the edges of the paper filter and press it against the sides of the filter basket to prevent filter from collapsing or shifting.
Note: do not replace the removable grinding chamber assembly until after Step 2.
2.Remove the attachment scoop from the lid (figure #4). Add the desired amount of ground coffee to the filter according the suggested coffee measurement on page 5 (figure #7). Replace the removable grinder chamber assembly. Close the lid.
Figure #7
3.Remove the carafe from the warming plate and fill with water. Open the water tank lid and pour the water into the water tank (figure #8). Using the water level indicator on the front of the coffee maker, fill to the desired finished cup level.
