OPERATING INSTRUCTIONS
The blender can be sued for pureeing and for blending. If necessary, cut solid ingredients into smaller pieces before you put them in the blender.
For your safety, always read and understand this instruction Manual before attempting to use any electric appliance.
Before Using:
1.Carefully unpack the blender. Remove all packaging materials.
2.Wash the lid, measuring cap, blade assembly, and glass jar in hot soapy water. Dry thoroughly.
3.Wipe exterior surfaces of the base with a soft, moist cloth to remove residue that may have collected during packing and handling. Dry thoroughly. Do not use abrasive cleaners. NEVER IMMERSE THE BLENDER, CORD OR PLUG IN WATER OR ANY OTHER LIQUID.
Blade Assembly:
1.Line up the two round indentions on the metal jar collar with the to round bumps on the glass blending jar.
2.Place the silicone sealing ring on the bottom of the glass jar.
3.Angle the blade assembly so one of the taller blades goes into the glass jar. Slowly lower the blade assembly so that the other blades enter the glass jar and the blade assembly sits flat on top of the silicone sealing ring.
4.Place the black locking ring around the blade assembly and rotate the black locking ring clockwise until it is tightened.
Note: If you notice liquid leaking from the bottom of the glass blending jar, remove the black locking ring and
This blender is equipped with cord storage located on the bottom of the appliance.
Blending:
1.Add ingredients to the blending jar.
2.Place lid on blending jar. Make sure the metal jar collar is properly seated on the die cast base.
3.Plug the power cord into a wall outlet. The LCD will read power “ON” indicating the blender is ready for operation.
4.To stop blending, Press the “STOP” button
