before using for the first time
1.Remove all packaging materials, including those which may be inside the toasting Slots or Toast Lever slot.
2.Wipe the exterior with a damp cloth. Dry thoroughly. Do not use abrasive cleaners.
3.Do not put the toaster, cord or plug in water.
4.Be sure the Crumb Tray is pushed all the way into the Toaster.
5.Plug into a 120V AC outlet.
6.Turn the Browning Control Knob to (1), the lightest setting.
7.Lower the Toasting Lever until it locks in place. Operate without bread once or twice to burn off any manufacturing residue. You may notice a slight amount of smoke; this is normal and will top as the heating elements continue to heat.
general instructions
This toaster is equipped with an automatic reset function. After each use, the toaster resets to “Toaster” mode. The unit is in Toaster mode when none of the function buttons have been selected.
toasting bread
NOTE: The Toast Lever will not lock into position unless the Toaster is plugged in!
NOTE: When toasting one slice, press down on the Toasting Lever and then press the
NOTE: DO NOT change the Browning Control selection during the Toast cycle. First press the Cancel Button; then turn the Browning Control Knob to adjust the browning level.
1.Be sure no bread or other objects are inside the Toasting Slot. Place Toaster on a flat, level,
2.Turn the Browning Control Knob to desired setting: (1) is the lightest setting and
(7)is the darkest. You may want to experiment with the Browning Control Knob to determine your preference. For the first use, set the Browning Control Knob to medium (4).
3.Remove all protective wrappings from food before placing into the Toasting Slots. Avoid toasting torn bread slices that may get lodged in Toasting Slot.
4.Insert the bread or toaster food into the Toasting Slots. Lower the Toast Lever until it locks into place. The Centering Guides will automatically center the food for even toasting. When the food is lowered into position, it will automatically begin to toast.
