ADDITIONAL SAFEGUARDS (CONT.)
CORD SAFETY TIPS
1.Never pull or yank on cord or the appliance.
2.To insert plug, grasp it firmly and guide it into outlet.
3.To disconnect appliance, grasp plug and remove it from outlet.
4.Before each use, inspect the cord for cuts and/or abrasion marks. If any are found, this indicates that the appliance should be serviced and the cord replaced.
5.Never wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and cause it to fray and break.
PARTS
1
2
3
4
1.Lid Latch
2.Lid
3.Grids
4.Power ON Light
5.Ready Light
5
Top of Lid
3
