Installation Instructions
16
UTILITY CLOSET CONNECTION LOCATIONS
IMPORTANT: Plan and locate plenum, wall plug, drain and
thermostat carefully to avoid interference. Hard-to-reach locations
will make installation and service difficult!
Reference Dimensions
AThermostat cable: 91⁄2′long
BPower cord: 60″long
CCase width and depth: 231⁄8″
DCase height: 31″
ECondensate drain: 3/4″connector
(Centerline of cutout is approximately 51⁄4″from
left case wall and 81⁄2″from back case wall.)
FTypical wall plug: 6″–12″above case
GRoom air sensor kit: 10′long
Outside wall
Flex duct may be used
for transitions only
Use rigid duct for 90°
bends and tees
F
CC
D
E
Platform
B
A
230/208 VAC
wall receptacle
or
conduit for direct
connection
G
51⁄4″81⁄2″