GE 840084900, 106636 manual Using Your Iron, To Dry Iron, To Steam Iron

840084900 Ev01 5/24/01 1:44 PM Page 4

Using Your Iron

To Dry Iron

1.Plug iron into electrical outlet. The Auto Shutoff Reset Button/Light will come on. If the plug will not fit, read about the polarized plug in “Consumer Safety Information.”

2.Turn the Temperature/Steam Dial to

a setting in the

Dry Iron range, settings 1-3. As an example, the illustration shows the iron set at 2 (Nylon).

NOTE: To dry iron at setting 4 and higher, empty all water from the iron.

3.Preheat for about four minutes before beginning to iron.

4.The iron will automatically shut off one hour after the iron is plugged in and the Auto Shutoff Reset Button/Light will go out. To turn the iron back on, press the Auto Shutoff Reset Button/Light located on the top of the handle.

5.When finished ironing, turn the

Temperature/

Steam Dial to 0 (OFF) and unplug iron.

To Steam Iron

1.Fill water tank following instructions in “Filling the Water Tank.”

2.Plug iron into electrical outlet. The Auto Shutoff Reset Button/Light will come on. If the plug will not fit, read about the polarized plug in “Consumer Safety Information.”

3.Turn the Temperature/Steam Dial to a setting in the Steam Iron range, settings

4-9. As an example, the illustration shows the iron set at 7 (Rayon).

4.Preheat for about four minutes before beginning to iron.

5.The iron will automatically shut off one hour after the iron is plugged in and the Auto Shutoff Reset Button/ Light will go out. To turn the iron back on, press the Auto Shutoff Reset Button/Light located on the top of the handle.

6.When finished ironing, turn the

Temperature/

Steam Dial to 0 (OFF) and unplug iron. Allow to cool and empty water from water tank. See “Storing Your Iron.”

4