5
1. Unplug iron. Fill the Removable
Reservoir according to directions.
Replace Reservoir.
2. Plug iron into outlet.
3. Turn
the Temperature
Control Dial
to highest setting.
4. Allow two minutes for the iron to
reach desired temperature.
5. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
To Vertical Steam
6. Hold iron about 6 inches away from
garment and
press and
release the Blast
Button to steam
out wrinkles.
Do not press the
Blast Button
more than once
every 2 seconds.
7. To turn iron off, turn Temperature
Control Dial to Off. Unplug iron.
8. Empty water from the iron following
directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to
touch delicate garments.
Optional Features (on selected models)
Spray and Blast of Steam Buttons – Push
Blast Button for an
extra blast of steam.
Push Spray Button
to release a fine
spray
of water for
difficult
wrinkles in
cotton or linen.
Automatic Shutoff Reset Button and Power
On Light – The
Automatic Shutoff
Reset Button light
comes on when the
iron is first plugged
in. After one hour,
the iron will shut
off and the light
will go out. Push
the Reset Button to turn iron back on.
The Power On Light comes on when
the iron is plugged in and remains on
until the iron is unplugged. The light
stays on even if Temperature Control
Dial is turned to Off.
Power
Light
Blast Spray
Adjustable Steam Switch – This switch
provides
minimum
steam for wool or
maximum steam
for linen. Set the
switch to Oto
change to
Dry Iron.
Reset
Button
840094500 Ev01 12/17/01 8:48 AM Page 5