![To Mix](/images/new-backgrounds/66359/663599x1.webp)
840136300 ENv00 4/8/05 1:17 PM Page 5
To Mix
1.Make sure mixer is unplugged and speed control is set to 0 (OFF). Insert beaters.
2.Plug mixer into electrical outlet. Place beaters into bowl.
3.Move the speed control to desired speed, starting at 1 and
| 6 | 5 | increasing to |
| 4 | ||
| a higher speed | ||
| 3 | ||
| 2 | ||
| as necessary. | ||
| 1 | ||
OFF |
| ||
|
| ||
0 |
|
| |
|
|
| |
| Eject |
|
|
4.When finished mixing, move the speed control to 0 (OFF) and unplug mixer.
5.To eject beaters, with speed control
Speed | set at 0 (OFF) | |
push straight | ||
Control | ||
down on the | ||
| ||
| speed control. |
Features
Hand Mixer Stabilizer
CAUTION: Never use the stabilizer when the mixer is on.
Do not use the
stabilizer on small (11⁄2 quart)
mixing bowls or
plastic mixing
bowls. This fea-
ture can be used on most large
mixing bowls. Use the stabilizer while adding ingredients or checking a recipe. To use, TURN MIXER OFF, then set the mixer on the edge of the bowl.
Power Surge (on selected models)
Press and hold down the button for
| additional power | |
0 | at any speed. | |
Eject | NOTE: Do not use | |
Power | Power Surge | |
Surge | ||
for more than | ||
| ||
Surge | two minutes at | |
a time or motor | ||
| may overheat. |
5