Installation Instructions

Air Conditioner

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT Save these

instructions for local inspector’s use.

IMPORTANT Observe all governing codes and ordinances.

Note to Installer – Be sure to leave these instructions with the Consumer.

Note to Consumer – Keep these instructions for future reference.

Skill level – Installation of this appliance requires basic mechanical skills.

Completion time – Approximately 1 hour

We recommend that two people install this product.

Proper installation is the responsibility of the installer.

Product failure due to improper installation is not covered under the Warranty.

You MUST use all supplied parts and use proper installation procedures as described in these instructions when installing this air conditioner.

ELECTRICAL REQUIREMENTS

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt a.c., protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

TOOLS YOU WILL NEED

Phillips head screwdriver

Adjustable wrench

Flat-blade screwdriver

 

 

 

Pencil

 

Ruler or tape measure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Level

 

Scissors or knife

 

 

 

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

7

Page 7
Image 7
GE AEE18 owner manual Before YOU Begin, Electrical Requirements, Tools YOU will Need

AEE18 specifications

The GE AEE18, a prominent model in the world of energy-efficient appliances, stands out for its cutting-edge technology and impressive design. This air conditioning unit exemplifies General Electric's commitment to innovation and consumer comfort, making it a popular choice for both residential and light commercial applications.

One of the key features of the GE AEE18 is its high energy efficiency rating. With an ENERGY STAR certification, it operates using less electricity while delivering optimal cooling performance. This not only helps homeowners save on energy bills but also makes a positive impact on the environment by reducing carbon footprints. The AEE18 is designed to cool spaces efficiently, ensuring comfortable temperatures even during the hottest summer months.

The unit boasts advanced cooling technologies, including a variable speed compressor that adjusts its output based on current temperature conditions. This allows the system to maintain consistent indoor climates without the abrupt temperature swings commonly associated with traditional air conditioning units. The use of environmentally friendly refrigerants further underscores GE's commitment to sustainability.

User convenience is enhanced through a variety of smart features integrated into the AEE18. The unit is equipped with a programmable thermostat, allowing users to set schedules according to their daily routines. Additionally, the Smart Home compatible unit can be controlled remotely via a mobile app, providing users the ability to adjust settings from anywhere.

Another notable characteristic of the GE AEE18 is its design, which combines functionality with aesthetics. The sleek exterior and compact form make it an ideal fit for various room sizes, ensuring that it blends seamlessly into any home decor. Its durable construction ensures longevity and reliability, bore out by GE's reputation for quality.

Furthermore, noise levels are a crucial consideration in any air conditioning unit, and the AEE18 excels in this area. The quiet operation minimizes disruptions, ensuring a peaceful environment, whether it's during the day or at night.

In summary, the GE AEE18 is a powerhouse of energy efficiency, advanced cooling technology, and user-friendly features. Its commitment to sustainability and its thoughtfully designed characteristics make it a strong contender in the air conditioning market. Whether for home or light commercial use, this unit promises to deliver comfort and peace of mind in any setting.