About the controls on the air purifier. | ge.com | ||||
| Auto | Circulation | Night |
|
|
Fan speed | setting | Filter reset |
| ||
indicator | indicator | indicator | indicator Timer indicator | indicator |
|
SPEED | CIRCULAIRE | TIMER FILTER RESET |
| Pre / HEPA |
SPEED |
|
| TIMER | 1h | 2h | 4h | 8h | LIGHT | |
AUTO | CIRCULAIRE |
|
|
|
| ||||
1 2 3 4 | 5 |
| AIR |
|
|
|
| HEPA | SENSOR |
|
|
|
|
|
| ||||
| AUTO | CIRCULAIRE NIGHT |
| POOR |
|
| GOOD |
|
|
Air quality
indicator
Manual Controls
Safety Instructions Operating Instructions
Power On/Off Button
Press to turn the air purifier on and off.
Filter Reset Button
The filter reset indicator light will come on when the filter needs to be replaced.
To reset the filter indicator after replacing the filter, if no filter lights are on:
For the
For the 99.97% True HEPA Filter, press the FILTER RESET button twice and the HEPA light will flash; then press and hold for 2 seconds. The indicator light for the filter will go off.
To reset the filter indicator after replacing the filter, if one or both lights are on:
Press and hold the FILTER RESET button for 2 seconds. One or both indicator lights will go off.
Timer Selector
Press to select from timer hour settings 1 hr., 2 hr., 4 hr., 8 hr. or OFF. The air purifier will run for the selected number of hours and then turn off.
Circulaire Selector
Press to set the circulation grille On or Off. When CIRCULAIRE is On, the circulation grille will move to circulate airflow. When CIRCULAIRE is Off, the grille will stop but remain open. After 6 hours of operation, the unit will automatically turn off.
Fan Speed Selector
Press to adjust the fan motor speed setting from levels 1, 2, 3, 4, 5 and AUTO. The Fan Speed indicator shows the setting level the fan is on.
In AUTO mode, the fan speed is automatically adjusted according to the dust level of the room. The Auto Setting indicator light will be on when the Speed is set to AUTO.
Light Sensor/Night Mode
When the air purifier is On and set to AUTO, the Light Sensor will detect the loss of light for more than 3 minutes. If this happens, the unit goes into Night Mode. When the Light Sensor detects bright light again, normal operations resume.
Care and Cleaning Troubleshooting Tips Consumer Support
3