Installation Instructions
1WINDOW REQUIREMENTS
•These instructions are for a standard
•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions.
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
13″ min.
22″ to 36″
(With accordion panels)
183⁄4″ min.
(Without accordion panels)
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.
To adjust for this, attach a piece of wood to the stool.
WOOD PIECES—
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.
Attach securely with nails or screws provided by the installer.
Wood
1/2″ higher |
|
than frame | Stool |
|
Storm window frame
11
3PREPARE THE WINDOW
ACut the window sash seal to the window width and stick the adhesive side to the bottom of the sash.
Window 
sash seal
INSIDE
BMark the centerline of the sill. Measure
and mark the locations for the support brackets 8″ from both sides of the centerline.
CPlace 2 support brackets on the sill,
against the back edge of the stool with their holes centered on each 8″ mark.
Type B screw
Inside
Stool
Sill
Support bracket
Outside Support bracket
DAttach them to the sill with one Type B screw through each support bracket.
