GE AGW18 About the controls on the air conditioner, Controls, Consumer Support, Remote Control

Instructions Operating Instructions Safety Instructions

About the controls on the air conditioner.

Features and appearance may vary.

Cool on Timer on

Fan on

Air Conditioner ControlsRemote Control

Controls

ON/OFF Pad	TIMER Pad
Turns air conditioner on and off.	ON—When the air conditioner is off,
Increase ▲ /Decrease ▼ Pads	it can be set to automatically come on in
	1 to 12 hours at its previous setting. Each
Use to set temperature when in COOL mode.
	touch will set the timer in hours.

Installation

MODE

Use to set the air conditioner to COOL or FAN mode.

FAN Pad

Use to set the fan speed to LOW (F1), MED (F2) or HIGH (F3).

OFF—When the air conditioner is on, it can be set to automatically turn off in

1 to 12 hours. Each touch will set the timer in hours.

To cancel the timer, press the TIMER pad until the display time disappears.

Troubleshooting Tips

Remote Control Signal Receiver

Display

Shows the set temperature or time remaining on timer.

Power Outage Recovery Feature

In the case of a power outage or interruption, the	feature was set, it will resume its countdown.
unit will automatically re-start in the settings last	You may need to set a new time if desired.
used after the power is restored. If the TIMER

Consumer Support

Remote Control

■To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

■The remote control signal has a range of up to 21 feet.

■Make sure nothing is between the air conditioner and the remote control that could block the signal.

■Make sure batteries are fresh and installed correctly as indicated on the remote control.

4