GE CMT-NEZ3, CMT-NEZ5 Creating your own program, — Program Play, 11GB, 4 Press ENTER, Play – CD/MP3, Other operations, 6 Press N (or CD/NX on the unit)

Press CD (or FUNCTION repeatedly) to switch the function to CD.

Press PLAY MODE in stop mode repeatedly until “PGM” appears.

Creating your own program

— Program Play

You can make a program of up to 25 steps. You can synchro record the programmed tracks onto a cassette tape (page 16).

3 Press . or > repeatedly until the desired track number appears.

When programming the MP3 audio tracks, press + or – to select album, then press

.or > repeatedly until the desired track number appears.

Selected track	Total playing time
number	(including selected track)

4 Press ENTER.

The track is programmed.

The program step number appears, followed by the last programed track number and the total playing time.

5 To program additional tracks, repeat steps 3 and 4.

6 Press N (or CD/NX on the unit).

Program Play starts.

Other operations

To	Do this
Cancel Program Play	Press PLAY MODE in stop
	mode repeatedly until both
	“PGM” and “SHUF”
	disappears.

Erase the program	Press CLEAR in stop
	mode.
	Each time you press the
	button, a track is cleared
	from the end of the
	program.

Add a track to the end of	Perform steps 3 and 4 in
the program	stop mode.

Tips

•The program you made remains after Program Play finishes. To play the same program again, press N (or CD/NX on the unit). However, the program is cleared when you open the CD compartment.

•“– –.– –” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over, or when you select an MP3 audio track.

Play – CD/MP3