GE dimensions PD968DP, GE Profile 30 Drop-In Electric Range

PD968DP

GE Profile™ 30" Drop-In Electric Range

Dimensions and Installation Information (in inches)

2-7/8" To Front Surface

Accessory

Backguard

24 31-1/4 A/B*

KW Rating

240V	11.6
208V	8.7
Breaker Size
240V	40 Amps
208V	40 Amps

Note: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194° temperature rating.

Note: To reduce possibility of scorching the side walls above the countertop when no load is present on burners, it is recommended that a minimum of 6" spacing from adjacent side wall be allowed for possible extended, high-heat, element operation.

IMPORTANT: 30" DROP-IN RANGES ARE DESIGNED TO HANG FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR. FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION INSTRUCTIONS PACKED WITH PRODUCT.

of Countertop

27

20-5/8" Door

Clearance

From Front

Surface of

Countertop

26-1/2**	*JXS37 is 5-1/4" and JXS32 is 4"
(excluding handle)

Optional Kits For Drop-In Electric Ranges (Available At Additional Cost)

Accessory Backguards (Attaches to the back of range

as a backguard when unit is installed in 30" free-standing cutout)

JXS32SS (Stainless) - 4" High JXS32BB (Black) - 4" High JXS37CC (Bisque) - 5-1/4" High JXS37BB (Black) - 5-1/4" High

Rear Filler Strip

WB07T10680 - Black Filler Strip Assembly

Installation information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

If necessary, build upsides to 1-1/4" thick to provide countertop support

**Total depth from wall to

front of closed oven door

including handle is 29-1/2.

30" Min.

6" Min. from walls

	30" Min.
23-3/16	Acceptable Electrical Outlet
	Area Also In Adjacent	15" Min.
	Cabinet Or Under Floor
	Conduit is 40" long
27-1/2	25
36
	7-1/2
30
All GE ranges are equipped with	Listed by	Acces
an Anti-Tip device. The installation
of this device is an important,	Underwriters
required step in the installation	Laboratories
of the range.

Specification Created 5/09 220805