GE Digital Video Multiplexer Recorder 2.7 Active Cameos , 2.8 Sequencing

0150-0229D 22 Kalatel DVMRe StoreSafe

2.7 Active Cameos

A cameo is defined as any cell within a multiscreen display. Active Cameo mode allows the user to

access and edit each cameo individually.

While viewing a multiscreen, enter Active Cameo mode by pressing the Enter

button. Active Cameo mode is indicated on-screen by flashing the number

and titles of the active cameo and the LED above the Enter button is lit. By

default, the top left cameo is activated. Enter Button

Select a cameo using the Jog/Shuttle to navigate the multiscreen. Rotating

the Jog selects the next screen up or down a row. Rotating the shuttle

selects the next screen in numerical order. The active cameo will always be

indicated by the flashing camera number and titles.

Jog/Shuttle

Display any camera in the active cameo by pressing the Number button of

the desired camera. Once a camera has been selected, the active cameo

advances to the next cameo on the right. Number Button

The camera selection only changes the multiscreen currently being displayed. Each multiscreen must

be configured separately. Changes to the multiscreen display are saved in non-volatile memory, and

will be retained even if power is removed from the unit.

Press the Freeze button to freeze the image in the selected cameo. Each

frozen cameo is indicated as * (a flashing asterisk) on-screen.

Press the Freeze button again to cancel Freeze operations. Freeze Button

2.8 Sequencing

The sequencing feature allows a camera to be displayed briefly on-screen,

before advancing to the next camera in the sequence list. The default

sequence list displays each camera in numerical order.

Sequence Button

The dwell time is the amount of time each camera is displayed on-screen before advancing to the next

camera. The default dwell time is 3 seconds.

The Autolist™ feature allows the user to create a custom sequence list, controlling the order the

cameras are displayed and the dwell time. Separate Autolists may be created for Monitor A (Live and

Playback mode) and Monitor B (Live mode). Using the Monitor button, select the monitor to be

programmed. Then, using a Number button, select any camera for full screen display.

The unit must be in Full Screen Display mode before starting to create the sequence list.

This initial camera is not part the sequence list.

NOTE