0150-0229D 39 Kalatel DVMRe StoreSafe
q Main Menu → Record → Disk Maintenance
Use the Jog to select from the following options, then press the
Enter button to begin.
Delete: Delete all data from the hard disk (with the possibility of restoring it).
Undelete: Restore data that has been deleted, but not yet overwritten.
Destroy: Erase all data from the hard disk permanently, without the possibility
of restoring it. Selecting this option brings up a confirmation dialog box.
q Main Menu → Record → Record Lock
Use this menu to set the Record Lock feature. This feature disables the front panel
record button. Setting Record Lock to ON will start the unit recording if it is not currently
in the Record mode.
q Main Menu → Record → ADM (Auto Delete Mode)
The ADM feature prevents the unit from displaying or archiving any search results that are more than
thirty days old. This feature may be required by law in some jurisdictions. If required by local authorities,
the ADM feature must be turned On by selecting between 7 and 99 days. Typically this feature is
turned Off.
ADM will change. Are you sure?
Message
ADM Setting
99 Days
Yes
Use this menu to configure the alarm handling features of the unit.
Caution! StoreSafe’s primary function is to furnish video
multiplexing and recording with a multiscreen display. Although
the unit has alarm handling and motion detection functions, these
are considered secondary features. This unit should not be the
only alarm device on site.
UnDelete
Destroy
Delete
ON
OFF
Alarm Latch
Enable / Disable
Alarm History
Link to a Macro
Buzzer Setup
Notification
Archive Alarms
Input Configuration