GE DWSR483GG installation instructions GE 7.0 Cu. Ft. Super Capacity Gas Dryer, 28-1/4, 25-1/2

DWSR483GG

GE® 7.0 Cu. Ft. Super Capacity Gas Dryer

Dimensions and Installation Information (in inches)

Exhaust Option: When viewed from the front of the unit, exhaust 3-way via rear, left and bottom. Dryer is shipped exhausted to the rear. Alternate exhausting knockouts are supplied.

Gas: An individual, properly-grounded branch circuit, with a three-prong grounding- type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse is required.

Gas Dryer Electric Rating: 120V, 60Hz, 6A

Gas (BTU/HR): 22,000. Factory-equipped for natural gas. Tested for LP gas. LP gas supply requires a conversion kit. Check installation instructions for correct kit and have a qualified gas technician install a conversion kit. See dryer ducting information for proper installation.

Note: Dryer wall outlet must be located within 36" of service cord entry and accessible when dryer is mounted in position.

Installation Information: For complete information, see installation instructions packed with your dryer.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

			*24-1/2" from the edge of the side panel to the front.
23-1/2		28-1/4
			25-1/2" from front to edge of endcaps.
	25-1/2*
				27

8-1/2		36 42		11-		1/2
			2-1/2	2	3-1/2
	Side View				Rear View

Power Cord Locations

5

Power

Cord Hole

4-1/2

Back View

Listed by

Underwriters

Laboratories

Specification Revised 9/07 370117