GE ELSV-60, ELS-24DC manual Watt Metal-Halide Light Source

ELSV-60

60 Watt Metal-Halide Light Source

Video pass-through channel eliminates the need for extra cables and power cords

Bright color box ensures easy visibility during night inspections Safe and user-friendly lamp system does not produce excessive heat

Dual video outputs allows for viewing on two separate monitors at the same time

The ELSV-60 features patented, field-proven Solarc® lamp technology that’s unlike anything else in the industry. This technology has a greater efficiency than halogen or xenon lamps when transferring light into a small fiber bundle such as those found in borescopes and fiberscopes. The lamp runs on only

60 W, keeping the ELSV-60 small and lightweight, and providing high-intensity white light without producing the excessive heat associated with 300 W xenon light sources.

The ELSV-60 offers a video channel for simple camera setup and operation. An intuitive single cable connection provides power to the camera and carries the signal from the camera back to the light source. Video outputs on the front panel provide the signal to a monitor or video recording device via composite and/or S- VHS connectors.

Specifications

Power Ratings

Power In:	100-240 VAC
Fuse Set:	2 each 2.0 A, 250 V, type F (fast acting), 5 x 20 mm

Physical

Dimensions:	23 x 23 x 9.3 cm (9.0 x 9.0 x 3.7 in.)
Weight:	2.4 kg (5.3 lbs.)

Illumination System

Lamp:	Solarc Metal Halide, 60 W, 60 V
Color Temperature:	6500 k
Median Lamp Life:	1000 hours
Intensity Control:	Manual shutter (0 to 100 % output)
Light Guide Interface:	Olympus® Standard

Environment

Operating Temperature:	0 to 60ºC (32 to 140ºF )
Operating Humidity:	0 to 95% rh, non-condensing
Storage Temperature:	-23 to 60ºC (-10 to 60ºF )
Storage Humidity:	30 to 75% rh, non-condensing

Video Pass-Through Channel

Multifunction cable connection provides power and composite/S-Video from input device* to output device/monitor.

Connector type: Hirose (HR10A-10R-12S)

*To reduce eye strain or to allow multiple viewers, a fiberscope or rigid borescope inspection can be captured by a camera using a BCAM-1000 C-mount video camera and displayed on a video monitor. Ask a GE Inspection Technologies sales professional about part number – CAM/LS SET 60

Accessories

Part Number	Description
SPL-600	Replacement lamp

LPT blades in a turbine engine Components on a pri

BCAM-1000

Video In

Light Exit

Video Out

Fiberscope camera system usin