29268
BEFORE YOU BEGIN
TEMPORARY TONE FEATURE
If you have Pulse ( rotary ) service and want to access
MODULAR JACK REQUIREMENTS
You need an RJ11C type modular jack, which is the most common type of phone jack and might look like the one pictured here. If you don’t have a modular jack, call your local phone company to find out how to get one installed.
INSTALLING THE PHONE
Wall plate
Telephone line jack
customer calling services that require touch
1.Press the TONE button ( * ) after you have connected to the service in order to enable touch
2. When you hang up, the phone automatically returns TONE button to Pulse dialing mode.
MEMORY
Your telephone should be placed on a level surface such as a desk top, or you can mount it on a wall , A desktop /wall mounting pedestal is built into the base of the phone.
Each of the memory buttons is capable of storing phone numbers that are up to 32 digits. Memory locations
for access.
STORING A NUMBER IN MEMORY
1. | Connect the telephone line cord to a modular telephone jack. |
2. | Slide the RINGER switch (on the handset ) to Low or High. |
1.Pick up the handset.
2.Press ths STORE button.
3.Dial the number to be stored (up to 32 digits), LCD show the phone number.
4.Press STORE again.
5.Press a memory location
6.Record the telephone number you want to store.
7.Hang up the handset.
INTRODUCTION
Your Telephone is designed to give you flexibility in use, and high quality performance. To get the most from your new telephone, we suggest that you take a few minutes right now to read through this instruction manual.
If you have any questions or problems, consult the Troubleshooting Tips for the solution.
PAPTS CHECKLIST
Your package should contain the following items:
3. Set PULSE/ TONE switch (on the handset ) to TONE for |
service, or set it to PULSE for rotary service. If you don’t know which |
type of service you have, check with the phone company. |
WALL MOUNT INSTALLATION
Your telephone may also be mounted on a wall plate (not included).
1.Slip the mounting holes (on the bottom of the base) over the wall plate posts and
firmly slide the unit down into place.
2.Plug the telephone line cord into a modular wall phone jack.
USING THE TELEPHONE FEATURES
RECEIVING A PHONE CALL
1.Be sure the RINGER switch is set to Hi ( 
) or Lo (
) position.
2.When the phone rings. lift the handset and begin your conversation.
3.After 5 sec, a talk timer will be displayed.
4.Slide the RINGER switch to the Off ( 
) position when you do not want to be interrupted by the phone ringing.
RINGER VOLUME
You may control the ringer volume level with the switch located on the right side of the handset.
= ringer tone will be loud. = ringer tone will be low. 
= telephone will not ring.
DIALING A NUMBER FROM MEMORY
You can dial numbers from memory when using the handset. When you get a dial tone, press the MEM button followed by the memory location
INSERTING A P AUSE IN THE DIALING SEQUENCE
Use the REDIAL button to add pauses to a dialing sequence, for example after you dial 9 for an outside line.
TROUBLESHOOTING TIPS
| PROBLEM | SOLUTION | |
No dial tone | • Check hook switch to make sure it pops up. |
|
Won’t dial out | • Make sure TONE / PULSE is set to correct position. | |
|
|
|
Phone doesn’t ring | • Make sure RINGER switch is set to Hi ( ) or Lo( ) | |
| • You might have too many phones on one line. |
|
Feedback when | • This is normal, power fluctuates with phone | |
dialing in PULSE mode | outpulsing. | |
|
|
|
Can’t be heard by | • Make sure phone cord is securely plugged in. | |
other party | • Make sure other phones aren’t off the hook | |
| at the same time you ’ re using the phone. | |
| It is normal for the volume to drop when | |
| additional phones are used at the same time. | |
CARE AND MAINTENANCE
To keep your phone working and looking good ,follow these guidelines;
• Avoid putting near heating appliances and devices that generate |
electrical noise (for example , motors and fluorescent lamps) |
• DO NOT expose to direct sunlight or moisture. |
• Avoid dropping and other rough treatment of the unit. |
• Never use a strong cleaning agent or abrasive powder because this |
will damage the finish. |
Base unit with handset
Model EX29268 |
|
00022382 (Rev.0 E/S) | Thomson Asia Limited |
Printed in China | 3/F., Delta House, 3 On Yiu Street, |
| Siu Lek Yuen, Shatin, Hong Kong |
|
is a trademark of General Electric Company and is under license by Thomson Asia Ltd., Hong Kong
PLACING A PHONE CALL
1.Lift the handset and wait for a dial tone.
2.Dial the telephone number you wish to call, while the LCD displays ‘Ξ’.
3.After 5 sec, a talk timer will be displayed.
REDIAL BUTTON
This unit redials up to 32 digits. To automatically redial the last number You called:
1.Pick up the handset to get a dial tone.
2.Press redial.
3.LCD shows the phone number you dialed.
Ringer
Hi/Lo/off
Mem
Redial
• Retain the original package in case you need to ship it at a later date. |
Used equipment must be disposed of in compliance with current environmental protection regulations. You should return it to your reseller or dispose of it in an approved recycling centre.
