
1.10Specifications:
1.10.1Input Water Requirements
| Minimum | Maximum |
Input flow Rate | 2.0 GPM | N/A |
Temperature (water) | 10°C (50°F) | 32°C (90°F) |
NOTE:
Operating at lower temperatures may make it impossible for the
pH (operating) | 5.5 | 10.5 |
TF Membranes |
|
|
pH w/chloramines present (operating) | 5.5 | 8.5 |
TF Membranes |
|
|
pH (cleaning) | 2.0 | 11.0 |
TF Membranes |
|
|
Pressure, dynamic | 30 PSI | 100 PSI |
1.10.2Flow Rates
Product Flow based on the following conditions:
| New Membranes |
| ||
| Operating Pressure: | 150 PSI | ||
| Product Pressure: | 1 PSI | ||
| Feed Water Temperature: | 77°F (25°C) | ||
GPM | LPM | GPD | LPD |
|
.41 | 1.55 | 588 | 2225.8 |
|
Membrane flux may vary ±15%
Waste Flow: 2000ml/min (±10%)
1.10.3Electrical Requirements
Motor | 1/3 HP |
|
Voltage | 115 V~ |
|
Hertz | 60 |
|
Amps | 10 |
|
Phase | single |
|
Power Cord (length) | 8 ft (2.4 m) |
|
|
|
|
|
|
|
12552e – 27 Feb 04 | 1 - 12 | General Information |