GE G1, E1240, A830, E1030, E1040 manual Connecting the camera and printer

Models: E1040 A830 E1240 E1030 G1

1 110
Download 110 pages 8.55 Kb
Page 85
Image 85

Connecting the camera and printer.

1.Make sure both the camera and printer are turned on.

2.Connect one end of the supplied USB cable to the USB port on your camera.

3.Connect the other end of the cable to the USB port on the printer.

If the camera is not connected to a PictBridge compatible printer, the following error message appears on the LCD screen.

The above error message would also appear if the USB mode were set incorrectly, in which case you should disconnect the USB cable, check the USB mode settings, ensure that the Printer is turned on, and then try connecting the USB cable again.

81

Page 85
Image 85
GE G1, E1240, A830, E1030, E1040 manual Connecting the camera and printer