GE GE-DS-242-POE user manual Telnet Setup, Logon to the Console

Logon to the Console

Once the terminal has connected to the device, power on the GE-DS-242-PoE Managed Switch, the terminal will display that it is running testing procedures.

Then, the following message asks for the login user name and password. The factory default password for the login screen is:

•Username: admin

•Password: admin

Figure 3: GE-DS-242-PoE Login screen

Note: For security reasons, please change and memorize the new password after this first setup. Passwords must be entered in lowercase letters in the console interface.

Telnet Setup

1.Connect an RJ-45 cable from the PC to a Switch port on the Managed Switch.

4 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10