Installation Instructions
2DISHWASHER CONNECTION (IF REQUIRED)
If you are connecting to a dishwasher, complete the following step. If a dishwasher is not to be connected, go on to “Attaching the Discharge Elbow” section.
1
KNOCK OUT PLUG
Using a blunt instrument (steel punch or wooden dowel), knock out entire plug. Do not use a screwdriver or sharp instrument. When knockout plug falls into disposer, you may remove it or simply grind it up when the disposer is used. This will not damage the disposer in any way, but may take some time to grind, over the course of several uses.
Knock out 
plug
2CONNECT HOSE
Connect the dishwasher hose using a hose clamp. If the hose size is different, you will need a stepped rubber adapter.
Hose Clamp | Stepped Rubber Adapter |
3ATTACHING THE DISCHARGE ELBOW
CONNECT DISCHARGE ELBOW
Connect the discharge elbow to the disposer.* Make sure all plumbing connections are tight.
Rubber
Gasket
*Some installations (see page 8 for examples) may require the use of a flexible drain pipe.
Discharge Elbow
6
