Proper Use of Detergent

Use only detergent specifically made for use in dishwashers. Cascade® Automatic Dishwashing Detergent has been approved for use in all GE dishwashers. Keep your detergent fresh and dry. Don’t put powder detergent into the dispenser until you’re ready to wash dishes.

The amount of detergent to use depends on whether your water is hard or soft. With hard water, you need extra detergent. With soft water, you need less detergent.

Protect your dishes and dishwasher by contacting your water department and asking how hard your water is. Twelve or more grains is extremely hard water. A water softener is recommended. Without it, lime can build up in the water valve, which could stick while open and cause flooding. Too much detergent with soft water can cause a permanent cloudiness of glassware, calledetching.

You’ll find two detergent dispensers on the

 

 

 

 

inside door of your dishwasher. All wash cycles

 

 

except RINSE ONLY require detergent in the

Open cup

main cup. Wash cycles with two washes will also

 

 

use the open cup. When using automatic

 

 

dishwashing detergent tabs, simply place

 

 

one tab in the main cup and close.

Main cup

Be sure the Dial is OFF before adding detergent. Otherwise, the detergent cup will not

close and latch properly. Add detergent then close the main cup.

NOTE: To open detergent cup after it has been closed, simply turn the detergent cup handle counter-clockwise until it releases. A snapping sound may be heard.

Forget to Add a Dish?

A forgotten dish can be added any time before the main wash.

 

Push the door latch to the left.

1

 

Once the water calms, open the door. Steam may rise out of the

2

 

dishwasher.

 

Add forgotten dishes.

3

 

Close the door and push the latch to the far right.

4

Safety Information

Operating Instructions

Troubleshooting Tips

Customer Service

13

Page 12 Page 14
Page 13
Image 13
GE GSD3700 series, GSD3900 series, GSD3600 series owner manual Proper Use of Detergent, Forget to Add a Dish?
Page 12 Page 14

GSD3600 series, GSD3700 series, GSD3900 series, GHD3500 series GSD3400 series specifications

The GE GHD3500 series, along with the GSD3400, GSD3900, GSD3700, and GSD3600 series, represents a significant advancement in the field of gas detection and monitoring systems. These series are engineered to meet the rigorous demands of various industrial applications, ensuring safety and compliance with environmental standards.

Starting with the GHD3500 series, these gas detectors are equipped with state-of-the-art sensors that enable accurate detection of a wide range of hazardous gases. Their compact design and robust construction allow for easy installation in diverse environments, from refineries to wastewater treatment plants. One of the key features of the GHD3500 series is its advanced signal processing technology, which enhances sensitivity and reduces the risk of false alarms.

The GSD3400 series, on the other hand, emphasizes versatility and user-friendliness. It offers multiple configuration options, allowing operators to tailor the system to their specific needs. The GSD3400 series features innovative self-diagnostic capabilities, ensuring that the sensors are always functioning optimally. Additionally, the robust wireless communication capabilities enable seamless integration with existing monitoring systems, facilitating real-time data sharing.

The GSD3900 series is designed for high-performance applications, focusing on increased detection range and reliability. This series employs cutting-edge multi-gas detection technology, allowing for the simultaneous measurement of several gas types. The ergonomic interface enhances user interaction, making it easier for operators to access crucial information quickly.

Meanwhile, the GSD3700 series is recognized for its durability and ruggedness, making it ideal for harsh environments where exposure to extreme temperatures and corrosive substances is common. These detectors are built with robust materials and are rated for protection against dust and moisture, ensuring long-term reliability.

Lastly, the GSD3600 series brings advanced analytics and data management functionalities to the table. With in-built cloud connectivity, operators can analyze data trends over time, helping to identify potential risks and initiate preventive measures before they escalate. The series also features customizable alert settings, enabling tailored responses to specific safety concerns.

In summary, GE's GHD3500 series and the GSD3400, GSD3900, GSD3700, and GSD3600 series collectively embody the pinnacle of gas detection technology, integrating advanced features, robust sensors, and user-centric designs to ensure safety and efficiency in various industrial settings.
Top Page Image Contents