GE GLDA696MSS dimensions GE Tall Tub Built-In Dishwasher, 24 Min, Electrical Rating

GLDA696MSS

GE® Tall Tub Built-In Dishwasher

Dimensions and Installation Information (in inches)

Electrical Rating
Voltage AC	120
Hertz	60
Total connected load amperage	9.1
Calrod® heater watts max	875
For use on adequately wired 120-volt,
15-amp circuit having 2-wire service
with a separate ground wire. This appliance
must be grounded for safe operation.
Note: The rough cabinet opening must be at
least 24" deep, 24" wide and approximately
34-1/2" high from floor to underside of		24"	24
the countertop. Dishwasher must not be		MAX.
installed more than 10 feet from sink for
proper drainage. All plumbing and		22
electrical work must be in accordance

32-1/2" to 34-3/4" Underside of Countertop

to Floor

Figure A

	This Wall Area
	must be Free
	of Pipes or
	wires		24"
5"	4"	5"			Min.
				4"

Plumbing and Electric Service

Must Enter Inside This Area

6"

24" Min.

Cabinets Square and Plumb

with local codes. The power cord and
connections must comply with the National
Electrical Code Section 422 and/or local
codes and ordinances. The cord must be no
longer than 6 ft. from the junction box to	32-11/32" MIN.
the receptacle.
	adj. to 34-1/2"
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.	20-1/2
For answers to your Monogram,® GE Profile™ or	4" (Adjustable)
GE® appliance questions, visit our website at	4
ge.com or call GE Answer Center® service,
800.626.2000.

Floor MUST be Even

With Room Floor

25-5/8

Listed by

Underwriters

Laboratories

Specification Revised 8/07 350251