How to Connect the Unicouple
|
|
| Pull Unicouple and its hoses completely out from |
|
| 1 | |
|
|
| storage compartment located at rear of dishwasher |
|
|
| and attach it to the faucet adapter. |
|
|
| Attach the Unicouple connector to the faucet |
|
| 2 | |
|
|
| adapter by depressing the collar at the top of the |
|
|
| connector. When Unicouple is all the way up onto |
|
|
| the adapter, release the collar. It will then snap into |
|
|
| position to lock the Unicouple in place. |
|
|
| The Unicouple’s small hose carries water from the |
|
|
| faucet to the dishwasher. Its large hose carries drain |
|
|
| water to the sink. Be sure Unicouple is pointing |
|
|
| toward the sink bowl drain opening and the sink |
|
|
| drain is open for water that will drain from your |
|
|
| dishwasher. If your dishwasher drains into a |
|
|
| disposer, operate the disposer until it is completely |
|
|
| empty before starting the dishwasher. |
|
|
| Turn hot water fully on before starting the |
|
| 3 | |
|
|
| dishwasher. |
How to Disconnect the Unicouple from Faucet Adapter
| Turn off the hot water. |
1 | |
| Release the water pressure by depressing the pressure release |
2 | |
| button. This relieves water pressure and protects you, and the |
| room, from severe splashing. |
| Release Unicouple from faucet by depressing the collar at the |
3 | |
| top of the Unicouple connector. |
Safety Information
Operating Instructions
Troubleshooting Tips
Customer Service
9
