Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service

14

Energy Options

HI TEMP Provides extra heat for best performance. It is used best
WASH with heavily-soiled dishes.
HEATED Turns the drying heater on for fast drying. This cycle will extend
DRY ON the time to your wash cycle. Available on all wash cycles except
RINSE ONLY.Add approximately 32 minutes to the cycle.
HEATED Shuts off the drying heat options. Dishes air dry naturally
DRY OFF and energy is saved.
Control Settings

Cycles

POTS & 9.5 gal., 63 min.
Rinse–Rinse–Rinse–Main Wash–Rinse–Rinse–Rinse
PANS For heavily soiled dishes or cookware with dried-on
or baked-on soils. Everyday dishes may be included.
This cycle will not remove burned-on foods.
NORMAL 8.0 gal., 63 min. Rinse–Rinse–Main Wash–Rinse–Rinse–Rinse
WASH For loads of everyday dishes, glasses and cookware
with medium soils. NOTE:Many dishes have lighter
soil than normal. Choosing a cycle other than
NORMAL WASH will save energy and water.
LIGHT 6.7 gal., 63 min. Rinse–Rinse–Main Wash–Rinse–Rinse
WASH For dishes with light soils.
SHORT 6.6 gal., 55 min. Rinse–Main Wash–Rinse–Rinse–Rinse
WASH For quickly washing loads of everyday dishes with medium
soils that have not dried on, such as loads consisting mostly
of glasses.
RINSE 3.9 gal., 12 min. Rinse–Rinse–Rinse
ONLY For rinsing partial loads that will be washed later.
Do not use detergent.
PLATE For warming clean dishes and serving plates. This cycle will take
WARMER approximately 32 minutes.
HOT
adds1.5 gal., 30 min. to selected cycle. Rinse–Start Selected Cycle
START Preheats wash water to correct temperature.

■Make sure the Dial is at the OFF position.

■Latch the door.

Start

Slowly turn the Dial to the STARTposition. Don’t turn it past

the START position, or you could accidentally miss a rinse.

There is a time delay between start-up and water fill so you

will not hear any wash action right away.

About the dishwasher control panel.