GE GSCF3PGX Rough-In Dimensions, Standard, New Construction and Replacement Installation

GSCF3PGX

GE® Counter-Depth 22.7 Cu. Ft. Side-By-Side Refrigerator with Dispenser

Rough-In Dimensions

Standard, New Construction and Replacement Installation

Installation Tips to Maximize the Built-In Look

•All wall/floor molding should be removed  prior to installation.

•Water recess on rear wall recommended to  prevent water line damage. 48" minimum length, 1/4" diameter water line tubing  recommended.

•When possible, recess both copper water  line and electrical outlet. (See local codes)

•Front and rear leveling legs are adjustable  for the built-in look. (See owner’s manual)

•If optional collar trim kit is to be used or  anticipated, see collar trim installation on  next page for different rough-in dimensions.

8' Ceiling

12" Soffit

13" to 14" Cabinet

70-3/4"*

24"

36"

*The rough-in dimension of 70-3/4" is minimum and is measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (71") to height of opening to allow additional clearance between cabinet doors and top of refrigerator trim when cabinet doors are in open position.

24" Cabinet

Water Electrical

3/4" Airspace

(1/2" Gap + 1/4"

Wall Plates)

25"

Counter

Top

Specification Revised 4/08 310288