GE GSD3630 Control Settings, Cycles, Energy Options, Start, Safety Information, Water Saver

Control Settings

Cycles

1

POTSCRUBBER For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may be included. This cycle will not remove burned-on foods.

NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter soil than normal. Choosing a cycle other than NORMAL WASH will save energy and water.

LIGHT WASH/ For dishes with light soils.

WATER SAVER

SHORT WASH For quickly washing loads of everyday dishes with medium soils that have not dried on, such as loads consisting mostly of glasses.

RINSE & HOLD For rinsing partial loads that will be washed later.

Do not use detergent.

PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.

■ Make sure the Dial is at the OFF position. ■ Latch the door.

■ NOTE: The lights over the pads come on when pressed, to indicate the cycle/option that has been selected. Press pad firmly until lights come on. These lights remain on while the door is locked.

2	Energy Options
	HI TEMP Provides extra heat for best performance. It is used
	WASH best with heavily-soiled dishes.
	HEATED DRY ON/ Turns the drying heater on for fast drying. This
	HEATED DRY cycle will extend the time to your wash cycle.
	HEATED DRY OFF Shuts off the drying heat option. Dishes air dry
	naturally and energy is saved.
	ENERGY SAVER Turns all ENERGY OPTIONS off.
3
	Start
	Slowly turn the Dial to the START position. Don’t turn it
	past the START position, or you could accidentally miss a
	rinse. There is a time delay between start-up and water
	fill so you will not hear any wash action right away.	9

Safety Information

Operating Instructions

Troubleshooting Tips

Customer Service