GE GSD950, GSD900, GSD800 Control Settings, Troubleshooting Tips Customer Service, Cycles, Start

Control Settings

1 Cycles

POTSCRUBBER For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may be included. This cycle will not remove burned-on foods.

NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter soil than normal. Choosing a cycle other than NORMAL WASH will save energy and water.

LIGHT WASH/ For dishes with light soils.

WATER SAVER

■Make sure the Dial is at the OFF position.

■Latch the door.

■NOTE: The lights over the pads (on some models) come on when pressed, to indicate the cycle/option that has been selected. Press pad firmly until lights come on. These lights remain on while the door

is latched.

2 Energy Options

TEMP BOOST ON/	Provides extra heat for best performance. It is
TEMP BOOST	used best with heavily-soiled dishes.
TEMP BOOST OFF	Turns off TEMP BOOST ON.
HEATED DRY ON/	Turns the drying heater on for fast drying. This
HEATED DRY	cycle will extend the time to your wash cycle.
HEATED DRY	Shuts off the drying heat options. Dishes air dry
OFF	naturally and energy is saved.
ENERGY SAVER	Turns off all OPTIONS.

3 Start

Slowly turn the Dial to the START position. Don’t turn it past the START position, or you could accidentally miss a rinse. There is a time delay between start-up and water fill so you will not hear any wash action right away.

Safety Information

Operating Instructions

Troubleshooting Tips

Customer Service

9