Installation Instructions Models 20, 22, 25

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

Questions? In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT – Save these

instructions for local inspector’s use.

•IMPORTANT – Observe all

governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Refrigerator Installation

15minutes

•Proper installation is the responsibility of installer.

•Product failure due to improper installation is not covered under the Warranty.

REFRIGERATOR LOCATION

•Do not install the refrigerator where the temperature will go below 60°F (16°C) because it will not run often enough to maintain proper temperatures.

•Install it on a floor strong enough to support it fully loaded.

ROLLERS

The rollers have 3 purposes:

■Rollers adjust so the door closes easily when opened about halfway.

■Rollers adjust so the refrigerator is firmly positioned on the floor and does not wobble.

■Rollers allow you to move the refrigerator away from the wall for cleaning.

To adjust the rollers, remove the base grille by pulling it out at the bottom.

WATER SUPPLY TO THE ICEMAKER (on some models)

If the refrigerator has an icemaker, it will have to be connected to a cold water line. A GE water supply kit is available at extra cost from your dealer, by visiting our Website at ge.com (in Canada, at www.geappliances.ca), or from Parts and Accessories, 800.626.2002.

CLEARANCES

Allow the following clearances for ease of installation, proper air circulation and plumbing and electrical connections.

•Sides 1/8″ (4 mm) • Top 1″ (25 mm) • Back 1″ (25 mm)

A door clearance of 3/4″ (19 mm) is needed for a 90º door opening which provides better access to food storage area.

DOOR ALIGNMENT

After leveling, make sure that doors are even at the top. To make the doors even, adjust the refrigerator door.

Using a 5/16″ socket wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it. (A nylon plug, embedded in the threads of the pin, prevents the pin from turning unless a wrench is used.)

After one or two turns of the wrench, open and close the refrigerator compartment door and check the alignment at the top of the doors.

Turn the roller adjusting screws clockwise to raise the refrigerator, counterclockwise to lower it. Use an adjustable wrench (3/8″ hex head bolt) or pliers.

To replace base grille, line up the clips on back of grille between the bar and the bottom of the cabinet. Push forward until grille snaps into place.

To remove the base grille, open the doors and then pull the grille straight out.

5/16″ Socket

Wrench

Raise

10

Page 9 Page 11
Page 10
Image 10
GE GSF25IGZWW manual Refrigerator Location, Rollers, Clearances, Door Alignment
Page 9 Page 11

GSF25IGZWW specifications

The GE GSF25IGZWW is a top-rated side-by-side refrigerator that combines functionality with modern design, making it a sought-after choice for contemporary kitchens. This appliance stands out due to its spacious interior and innovative features aimed at enhancing food preservation and user convenience.

One of the defining characteristics of the GSF25IGZWW is its impressive storage capacity. It offers a total of 25.3 cubic feet of space, allowing users to store a significant amount of groceries, including larger items. The adjustable shelves in both the fridge and freezer compartments provide flexibility in organizing various food items. The shelving design accommodates taller bottles and containers, maximizing available space.

The refrigerator showcases GE's advanced cooling technologies. The advanced cooling system ensures that temperatures remain consistent throughout the refrigerator and freezer compartments, effectively minimizing temperature fluctuations that can compromise food quality. Additionally, the unit is equipped with a high-efficiency compressor that helps maintain optimal cooling while minimizing energy consumption.

Another notable feature of the GE GSF25IGZWW is its integrated water and ice dispenser. The external dispenser offers both filtered water and ice, giving users immediate access to cold beverages without opening the fridge. The water filter system not only ensures the purity of the water but also reduces contaminants, providing peace of mind for families.

The refrigerator's LED lighting enhances visibility and energy efficiency. The bright, long-lasting LED bulbs illuminate every corner of the interior, making it easier to find items even in low-light conditions. This feature contributes to the overall user-friendly design of the appliance.

In terms of design, the GSF25IGZWW boasts a sleek and modern look that complements various kitchen styles. Its stainless steel finish adds a touch of elegance, while the smooth exterior is easy to clean and maintain.

Overall, the GE GSF25IGZWW is a reliable choice for those seeking a functional, stylish, and energy-efficient refrigerator. With its extensive storage capacity, innovative cooling technologies, and convenient features, this side-by-side refrigerator meets the demands of busy households while maintaining a contemporary aesthetic.
Top Page Image Contents