Cycle Chart

Cycle Water Usage (gal.) Cycle Time (min.)
Hot Start Option13.4 26
Pots &Pans 9.2 71
Normal Wash* 6.3 71
Short Wash* 3.8 58
Rinse Only* 2.5 13
Drying/Plate Warmer 0.0 27
* Normal Wash should be selected to run this cycle.
1Hot Start Option adds water amount and cycle time shown when selected.
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions

Energy Options

HEATED DRY ON Turns the heating element on for fast drying. This option will extend the time of your wash cycle.
Available on all wash cycles except
RINSEONLY
. Adds approx. 32 minutes to the cycle.
HEATED DRY OFF Turns
HEATEDDRY
off.Dishes air dry naturally and energy is saved.

Cycles

POTS & PANS For heavily soiled dishes or cookware with dried-on or baked-on soils.
Everyday dishes may be included.
This cycle will not remove burned-on foods.
NORMAL WASH
For loads of everyday dishes, glasses and cookware with medium soils.
NOTE:
Many dishes have lighter soil than normal.
Choosing
a cycle other than
NORMAL WASH
will save energy and water.
SHORT WASH For quickly washing loads of everyday dishes with medium soils
that have not dried on, such as loads consisting
mostly of glasses.
RINSE ONLY For rinsing partial loads that will be washed later.
Do not use detergent.
PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 30 minutes.
HOTSTART Preheats wash water to the correct temperature.

Start

Slowly turn t
he Dial to the

START

or

ON

position, or the selected cycle. Don’t turn it past the

START,ON

or cycle position, or you could accidentally miss a rinse.
There is a time delay between start-up and water fill so you will not hear any wash action right away.
■Latch the door to begin the cycle.
Control Settings
GEAppliances.com
5