GXSF27B-GE SmartWater Water Softening System, GE Appliances

GE Appliances

GXSF27B—GE SmartWater™ Water Softening System

OUTSIDE FAUCET

(HARD WATER)

SOFT, COLD

WATER

SOFT, HOT

WATER

IS THE TRANSFORMER PLUGGED INTO A CONTINUOUSLY "LIVE" 120V-60Hz OUTLET?

DID YOU SET THE TIMER TO THE

CORRECT TIME OF DAY, AND

WATER HARDNESS NUMBER?

WATER

HEATER

BE SURE THE ELECTRIC OR

FUEL SUPPLY TO THE WATER

HEATER IS ON

DID YOU FILL THE BRINE TANK WITH

SALT?

WATER

SOFTENER

OUTSIDE FAUCET

(HARD WATER)

GROUND
STRAP	BE SURE HARD WATER IS
	PLUMBED INTO SOFTENER
	VALVE INLET
	BE SURE BYPASS VALVE STEM IS
	POSITIONED FOR SOFT WATER "SERVICE"
INLET
	BE SURE VALVE DRAIN HOSE RUNS
	DIRECTLY TO AN ACCEPTABLE DRAIN
	POINT, AND IS NOT PINCHED, KINKED
	OR ELEVATED TOO HIGH IF RUN
	OVER- HEAD. DID YOU PROVIDE AN
	AIR-GAP AT THE DRAIN POINT?
	HARD WATER TO HOUSE
	WATER METER
	MAIN SHUTOFF
	VALVE

•Install softener at point-of-entry into house before water heater. Needs to be within five feet of water inlet.

•Install within ten feet of proper drainage; e.g. drain, standpipe or a sump which does not drain directly to outside.

•Within ten feet of 120V, 60Hz electrical outlet- transformer must be plugged into an inside outlet.

•All units must be installed according to local plumbing and electrical regulations.

THE BRINE TANK OVERFLOW	SECURED
HOSE IS A GRAVITY DRAIN. BE
SURE THE HOSE IS NOT RAISED
HIGHER THAN THE FITTING ON
THE TANK AND IS SECURED
NOTE: Should not be installed in
direct sunlight, freezing conditions,
or where unit can get wet.

Specification Created 2/00

GE warranty GXSF27B-GE SmartWater Water Softening System, GE Appliances, Extremely Important