GE HLD4040N dimensions HLD4000/40N - Hotpoint Built-In Dishwasher, Electrical Rating, KitAB

HLD4000/40N – Hotpoint Built-In Dishwasher

Dishwasher Dimensions (in inches)

See Detail E for 3/4" Panel

2524

MAX.

22

27-1/2

33-3/4" MIN.

adj. to 35"

20-1/2

4 (Adjustable)

4

Door insert

A

		B		F
Section E-F				F
	C		Front View
3/8

3/4

KitAB

1-7/81-7/8

20

Back View

Panel

CThickness

		This Wall Area
		must be Free
		of Pipes or
34-1/2"1/4"		wires			24"
Underside of	5"	4"		5"		Min.
Countertop
					4"
to Floor
	Plumbing and Electric Service
	Must Enter Inside This Area
							Cabinets
					6"		Square
							and
Figure A
			24"				Plumb
			Min.
Floor MUST be Even
With Room Floor

Note: The rough cabinet opening must be at least 24" deep, 24" wide and approximately 34-1/2" high from floor to underside of the countertop. Dishwasher must not be installed more than 10

Electrical Rating
Voltage AC	120
Hertz	60
Total connected load amperage	10
Calrod® heater watts max	875

For use on adequately wired 120-volt, 15-amp circuit having 2-wire service with a separate ground wire. This appliance must be grounded for safe operation.

GPF525	25-1/4"	23-1/2"	N/A	1/4"
GPF575	25-1/2"	23-5/8"	1/4"	3/4"

feet from sink for proper drainage. All plumbing and electrical work must be in accordance with local codes. The power cord and connections must comply with the National Electrical Code Section 422 and/or local codes and ordinances. The cord must be no longer than 6 ft. from the junction box to the receptacle.

Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data.

Specification Created 9/06

As an Energy Star®
partner, GE has determined	Listed by
that this product meets the	Underwriters
Energy Star guidelines	Laboratories
for energy efficiency.

450151