GE JVM1540 To Install Charcoal Filter, Charcoal Filter on some models, To Remove Charcoal Filter

Models: JVM1540 JNM1541 HVM1540

1 40
Download 40 pages 24.31 Kb
Page 35
Image 35
Charcoal Filter (on some models)

Charcoal Filter (on some models)

The charcoal filter cannot be cleaned. It must be replaced. Order Part No. WB02X10776 from your GE supplier.

If the model is not vented to the outside, the air will be recirculated through a disposable charcoal filter that helps remove smoke and odors.

The charcoal filter should be replaced when it is noticeably dirty or discolored (usually after 6–12 months, depending on hood usage). See “Optional Kits,” page 9 for more information.

To Remove Charcoal Filter

Remove 4 grille screws to remove the grille.

To remove the charcoal filter, disconnect power at the main fuse or circuit breaker panel or pull the plug.

Remove the top grille by removing the 4 screws that hold it in place. Slide the filter toward the front of the oven and remove it.

To Install

Charcoal Filter

To install a new filter, remove plastic and other outer wrapping from the new filter.

Insert the filter into the top opening of the oven as shown. When properly installed, the wire mesh of the filter should be visible from the front. Replace the grille and 4 screws.

35

Page 35
Image 35
GE JVM1540, HVM1540, JNM1541 To Install Charcoal Filter, Charcoal Filter on some models, To Remove Charcoal Filter