JB640SN
GE® 30" Free-Standing Electric Range
Dimensions and Installation Information (in inches)
KW Rating
240V | 10.5 |
|
|
208V | 7.9 |
|
|
Breaker Size
40 Amps†
†Note: Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a
Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.
Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of
Installation information: Before installing, consult installation instructions packed with product for current dimensional data.
All 30" GE gas and electric range backguards are 30-7/8" wide.*
Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possible scorching of walls, engineering recommends a minimum of
*Except these models: JGBS07, JGBS04, JGBP90, all GE Profile
Fits most countertop backsplash applications. Consult Use & Care Manual for detailed installation instructions.
Acceptable electrical
outlet area
29-7/8
46-7/8
25-3/8
47-5/8
30
25
Dimension from wall to closed oven door hand
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Dimension from wall to front of closed oven door handle is
All GE ranges are equipped with | Listed by |
an | |
of this device is an important, | Underwriters |
required step in the installation | Laboratories |
of the range. |
|
Specification Revised 10/08 | 321520 |
