Safety Instructions
Care and cleaning of the range.
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the
Operating Instructions
How to Remove Packaging Tape
To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape and cooktop labels on new appliances
is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.
Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.
NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.
Control Knobs (on some models)
Care and Cleaning
The control knobs may be removed for easier cleaning.
Before removing the knobs for cleaning, please note that the knobs are in the OFF position. When replacing the knobs, check the OFF position to insure proper placement.
Wash the knobs in soap and water or a vinegar and hot water solution but do not soak.
Tips
Oven Vent
The oven vent is located above the right rear | It is normal for steam to come out of |
surface unit. | the vent. |
This area could become hot during | The vent is important for proper air circulation. |
oven use. | Never block this vent. |
Consumer Support Troubleshooting
Control Panel
If desired, the touch pads may be deactivated before cleaning.
See the Oven or Range Lockout information in the Using the clock, timer and control lockout section in this manual.
Clean up splatters with a damp cloth.
You may also use a glass cleaner.
Remove heavier soil with warm soapy water. Do not use abrasives of any kind.
Reactivate the touch pads after cleaning.
32
