GE JBP35SH dimensions GE Appliances, Dimensions in inches, Acceptable electrical outlet area

GE Appliances

JBP35SH – GE® 30" Free-Standing QuickClean™ Electric Range

Dimensions (in inches)

2-1/2

Acceptable electrical outlet area

29-7/8

44-7/16

25-3/8* 47-5/8

30

25

2-1/2

7-1/2

Preferred electrical outlet area Roughed-in dimensions

KW Rating

240V 11.7 208V 8.8

Breaker Size

40 Amps†

†Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations

Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

All GE ranges are equipped with
an Anti-Tip device. The installation		Listed by
of this device is an important,
required step in the installation		Underwriters
of the range.	R	Laboratories

*Dimension from wall to front of closed door handle is 27-3/4

Specification Revised 9/04

322008

For answers to your Monogram ® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.