GE dimensions JBP64BH - GE 30 Free-Standing CleanDesign Electric Range, GE Appliances, Amps†

GE Appliances

JBP64BH – GE® 30" Free-Standing CleanDesign™ Electric Range

Dimensions and Installation Information (in inches)

	7	7-1/2
7-1/2
		5
REAR	3-1/2	2-1/4

WALL

2-1/4

CENTER LINE

†The range may be placed with a 0" clearance (flush) at the back wall and side walls if the range side trims extend beyond the cabinet fronts at least 1/4 Self-Clean models only

29-7/8

46-7/8

25-3/8*

47-5/8

KW Rating 240V 10.5 208V 7.9

Breaker Size

40 Amps†

†Note: Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations

Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops. To reduce possibil ity of scorching walls, it is recommended a minimum of 1-1/2" spacing be allowed from adjacent side walls to allow for possible extended, high-heat, no-load heating element operation.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

an Anti-Tip device. The installation		Listed by
of this device is an important,
		Underwriters
required step in the installation
	R	Laboratories
of the range.

*Dimension from wall to front of closed door handle is 27-3/4

Specification Revised 9/04

For answers to your Monogram ® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

321503