GE JBP65SM installation instructions GE 30 Free-Standing CleanDesign Electric Range, Listed by

JBP65SM

GE® 30" Free-Standing CleanDesign™ Electric Range

Dimensions and Installation Information (in inches)

KW Rating

240V	11.5
208V	8.6

Breaker Size

40 Amps†

†Note: Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.

Installation information: Before installing, consult installation instructions packed with product for current dimensional data.

2-1/2

Acceptable electrical

outlet area

29-7/8

46-7/8

25-3/8

47-5/8

30

25

2-1/2

7-1/2

Dimension from wall to closed oven door hand

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Dimension from wall to front of closed door handle is 27-3/4".

All GE ranges are equipped with	Listed by
an Anti-Tip device. The installation
of this device is an important,	Underwriters
required step in the installation	Laboratories
of the range.

Specification Revised 6/07 321563