GE Appliances

JBS27SH – GE® 30" Free-Standing Electric Range

Dimensions (in inches)

For all 30" Free-Standing Range models with coil heating elements

29-7/8

46-7/8

1/4

26-1/4*

46-1/4

7-1/2

REAR

WALL

2-1/4

7-1/2

7

5

3-1/2

2-1/4

CENTER LINE

KW Rating

240V

12.6

208V 9.9

Breaker Size

40 Amps

Note: Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations

Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: 30" Ranges conform to U.L. requirements for 0" spacing for adjacent walls below countertops. Allow 1-1/2" spacing from the side of the range

*Dimension from wall to front of closed oven door without handle.

†The range may be placed with a 0" clearance (flush) at the back wall and side walls if the range side trims extend beyond the cabinet fronts at least 1/4".

Self Clean models only.

Specification Revised 11/05

321685

to adjacent vertical walls above the cooktop surface.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

All GE ranges are equipped with

 

Listed by

an Anti-Tip device. The installation

 

of this device is an important,

 

Underwriters

required step in the installation

R

Laboratories

of the range.

 

 

For answers to your Monogram,® GE Profileor

GE® appliance questions, visit our website at

GEAppliance.com or call

GE Answer Center® service, 800.626.2000.

Page 1
Image 1
GE JBS27SHSS dimensions JBS27SH GE 30 Free-Standing Electric Range, Dimensions in inches, 29-7/8 46-7/8 26-1/4 46-1/4